restoring a 1965 Mustang
The rear seat support brackets both sported rust damage near the bottom where they attached to the floor. Rather than recreate the sections by hand I decided to attempt drafting them up in CAD and then having an online laser cutting shop cut the steel and ship it to me. The company that I ordered […]
The completion of the floor install meant that the seat risers were up next! I dropped them in place and stood on them to try and get them to flex into shape. On the driver’s side I still ended up with a gap at the back right corner that was just large enough for me […]
With the subframe connectors installed it was finally the floor’s turn. Getting the floor in and out of the car wasn’t particularly easy. If you angle it right you can lead the front of the pan in through the door gap, rotating it into place once the back left corner clears the quarter window. The […]