restoring a 1965 Mustang
After grinding down the welds on the lower cowl and drilling out all the holes for the spot welds on the upper cowl I mocked everything up again, paying specific attention to where the upper cowl mates with the dash panel to form the base of the windshield frame. Some minor adjustments were necessary along […]
The first order of business was to mock up the entire cowl and install the wiper motor assembly to ensure that everything was lining up as expected. It appeared that the front of the upper cowl wanted to sit back a fraction of an inch further on the driver’s side than it did on the […]
In search of a change of pace, I decided to tackle removing the cowl. Looking back it probably would have been a good idea to wait to do this, but what’s a good project if not a series of new mistakes. In addition to the clear rust damage on the sides, I knew that water […]